• 45° Elbow P x P - Wrot Copper, PCH606

    45° Elbow P x P - Wrot Copper
    The NIBCO® Press System copper 45-degree elbow features an inboard bead and yellow HNBR O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, robust seal in seconds with no flame, solder or flux. The elbow has press connections. The fitting provides a method of changing the pipeline direction by 45 degrees.

    • Operating pressure 200 PSI max, (125 PSI for natural gas applications) depending on the application.
    • Temperature range -40°F to 180°F
    • ASTM B75 Alloy C12200 Copper
    • IFGC International Fuel Gas Code
    • NFPA 54/Z223.1 National Fuel Gas Code
    • NFPA 58 Liquified Petroleum Gas Code
    • UPC Chapter 12 Fuel Piping
    • NFPA30 Flammable and Combustible Liquids Code
    • NFPA30A Code for Motor Fuel Dispensing Facilities and Repair Garages
    • NFPA 31 Standard for the Installation of Oil Burning Equipment (supply line only)
    • Third party certified to ANSI LC4/CSA 6.32
    • Third Party Certifiefd to IAPMO/UPC LCL-4
    • ICC-ES PMG 1036
    • Size range 1/2" to 2"
    SizeDescriptionUPCNIBCO #BIM/CAD
    1/2PCH606 1/2 PRESS X PRESS 45 ELBOW0399234121889042800HPCView 2D
    3/4PCH606 3/4 PRESS X PRESS 45 ELBOW0399234121959042900HPCView 2D
    1PCH606 1 PRESS X PRESS 45 ELBOW0399234122019043000HPCView 2D
    1 1/4PCH606 11/4 PRESS X PRESS 45 ELBOW0399234122189043100HPCView 2D
    1 1/2PCH606 11/2 PRESS X PRESS 45 ELBOW0399234122259043200HPCView 2D
    2PCH606 2 PRESS X PRESS 45 ELBOW0399234170779043305HPCView 2D

    NIBCO® PressG Limited Warranty


    NIBCO INC. warrants:


    • NIBCO PressG fittings and flanges to be free from defects in materials and workmanship under normal use and service for a period of 25 years from the Warranty Commencement Date. The Warranty Commencement Date for NIBCO PressG fittings shall be the date upon which the fitting or flange is installed.
    • NIBCO Press System pressure rated metal valve to be free from defects in materials and workmanship under normal use and service for a period of five (5) years from date put into service with the exception of models PC-FP-600A-LF for which a two (2) year warranty period from date put into service applies.


    This limited warranty applies to all NIBCO PressG products installed in accordance with NIBCO’s approved and published installation, testing and application recommendations and instructions. This includes product installed in accordance with the Press Tool & Jaw Compatibility Matrix in effect at the time of installation as published in the most current online version of the NIBCO Press System Catalog.

    NIBCO does NOT warrant against failure of NIBCO PressG fittings, flanges and valves (referred to hereafter as “product”) for:any product, parts or systems which are not manufactured or sold by NIBCO, INC.;

    1. any product which is used for purposes other than a purpose authorized by NIBCO INC.;
    2. any product which is used for purposes other than a purpose authorized by NIBCO INC.;
    3. any product not installed in accordance with either the recommended installation guidelines provided by NIBCO INC. and/or applicable plumbing codes;
    4. damage to the product caused by, contributed in whole or in part by, or resulting from, any of the following
      • abuse, misuse, mishandling, tampering, neglect or accidental damage such as, without limitation, vandalism
      • natural disasters, such as, without limitation, flooding, windstorm and lightning
      • attachments or modifications to the product that are not authorized by NIBCO INC.
      • external causes, where external, physical or chemical qualities produce damage to the product, such as, without limitation, variation in water quality, aggressive water or an unsuitable or hostile environment, or
      • any other cause beyond the control of NIBCO INC.


    NIBCO shall NOT be liable under any circumstances for any other direct or indirect, incidental or consequential damages of any kind, including but not limited to loss of business, lost profits, mold intrusion, water damage, etc. The  liability of NIBCO under this warranty is solely limited to the replacement of any product that has been determined by NIBCO INC., or an authorized representative or agent thereof, to contain a defect in material or workmanship. 

    NIBCO Press System tools are covered by a limited warranty against defects in material or manufacturing for a period of two (2) years from date of purchase by the contractor. This limited warranty covers the repair or replacement of the tool, at NIBCO’s discretion, if NIBCO has received the tool, inspected it, and the tool is found to be defective.

    This warranty is the only warranty for the product provided by NIBCO INC., and is and shall be in lieu of any and all other warranties, expressed or implied, including but not limited to an implied warranty of merchantability, and for all other obligations or liabilities on the part of the Manufacturer. No employee of NIBCO INC., or any other distributor, agent or other person or business, is authorized to make any other warranty on behalf of NIBCO, INC.

    In the event any defect occurs which is believed to be covered by this warranty, NIBCO Technical Services should be immediately contacted either in writing or by telephone at 888.446.4226. NIBCO Technical Services will make further arrangements for the product’s return to NIBCO INC. for review and evaluation. In the event that a returned product is determined by NIBCO INC. to be defective, NIBCO INC. will remediate the failure by repairing or replacing the product within a reasonable time, without charge to the owner of the product.

    This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

    To the best of our knowledge, the information contained in this publication is accurate. However, NIBCO does not assume any liability, whatsoever for the accuracy or completeness of such information. Final determination of the suitability of any information or product for the use to be contemplated is the sole responsibility of the user. The manner of that use, and whether there is any infringement of patents, is also the sole responsibility of the user.


    How To Order Information not found


    Engineers, contractors, wholesalers or manufacturers may obtain special or technical assistance from any factory representative of NIBCO. Write, fax or phone.

    World Headquarters
    1516 Middlebury Street
    Elkhart, IN 46516-4740

    PH: 1.574.295.3000 or 1.888.446.4226
    FAX: 1.574.295.3307 or 1.888.336.4226